System object: phased.ConformalArray
Simulate received plane waves
Y = collectPlaneWave(H,X,ANG)
Y = collectPlaneWave(H,X,ANG,FREQ)
Y = collectPlaneWave(H,X,ANG,FREQ,C)
Incoming signals, specified as an M-column matrix. Each column of X represents an individual incoming signal.
Directions from which incoming signals arrive, in degrees. ANG can be either a 2-by-M matrix or a row vector of length M.
If ANG is a 2-by-M matrix, each column specifies the direction of arrival of the corresponding signal in X. Each column of ANG is in the form [azimuth; elevation]. The azimuth angle must be between –180 and 180 degrees, inclusive. The elevation angle must be between –90 and 90 degrees, inclusive.
If ANG is a row vector of length M, each entry in ANG specifies the azimuth angle. In this case, the corresponding elevation angle is assumed to be 0.
Carrier frequency of signal in hertz. FREQ must be a scalar.
Propagation speed of signal in meters per second.
Default: Speed of light
Received signals. Y is an N-column matrix, where N is the number of elements in the array H. Each column of Y is the received signal at the corresponding array element, with all incoming signals combined.
Simulate the received signal at an 8-element uniform circular array.
The signals arrive from 10 degrees and 30 degrees azimuth. Both signals have an elevation angle of 0 degrees. Assume the propagation speed is the speed of light and the carrier frequency of the signal is 100 MHz.
N = 8; azang = (0:N-1)*360/N-180; hArray = phased.ConformalArray(... 'ElementPosition',[cosd(azang);sind(azang);zeros(1,N)],... 'ElementNormal',[azang;zeros(1,N)]); y = collectPlaneWave(hArray,randn(4,2),[10 30],1e8);
collectPlaneWave modulates the input signal with a phase corresponding to the delay caused by the direction of arrival. The method does not account for the response of individual elements in the array.
For further details, see .