Documentation Center

  • Trials
  • Product Updates

sim(idnlarx)

Simulate nonlinear ARX model

Syntax

YS = sim(MODEL,U)
YS = sim(MODEL,U,'Noise')
YS = sim(MODEL,U,'InitialState',INIT)

Description

YS = sim(MODEL,U) simulates a dynamic system with an idnlarx model.

YS = sim(MODEL,U,'Noise') produces a noise corrupted simulation with an additive Gaussian noise scaled according to the value of the NoiseVariance property of MODEL.

YS = sim(MODEL,U,'InitialState',INIT) specifies the initial conditions for simulation using various options, such as numerical initial state vector or past I/O data.

To simulate the model with user-defined noise, set the input U = [UIN E], where UIN is the input signal and E is the noise signal. UIN and E must both be one of the following:

  • iddata objects: E stores the noise signals as inputs, where the number of inputs matches the number of model outputs.

  • Matrices: E has as many columns as there are noise signals, corresponding to the number of model outputs.

Input Arguments

  • MODEL: idnlarx model object.

  • U: Input data for simulation, an iddata object (where only the input channels are used) or a matrix. For simulations with noisy data, U contains both input and noise channels.

  • INIT: Initial condition specification. INIT can be one of the following:

    • A real column vector X0, for the state vector corresponding to an appropriate number of output and input data samples prior to the simulation start time. To build an initial state vector from a given set of input-output data or to generate equilibrium states, see data2state(idnlarx), findstates(idnlarx) and findop(idnlarx). For multi-experiment data, X0 may be a matrix whose columns give different initial states for different experiments.

    • 'z': (Default) Zero initial state, equivalent to a zero vector of appropriate size.

    • iddata object containing output and input data samples prior to the simulation start time. If it contains more data samples than necessary, only the last samples are taken into account. This syntax is equivalent to sim(MODEL,U,'InitialState',data2state(MODEL,INIT)), where data2state(idnlarx) transforms the iddata object INIT to a state vector.

Output Arguments

  • YS: Simulated output. An iddata object if U is an iddata object, a matrix otherwise.

    Note:   If sim is called without an output argument, MATLAB® software displays the simulated output(s) in a plot window.

Examples

Simulate a SISO idnlarx model

Simulate a single-input single-output idnlarx model M around a known equilibrium point, with an input level of 1 and output level of 10.

  1. Load the sample data.

    load iddata2;
    
  2. Estimate an idnlarx model from the data.

    M = nlarx(z2, [2 2 1], 'tree'); 
  3. Estimate current states of model based on past data.

    x0 = data2state(M, struct('Input',1, 'Output', 10));
    
  4. Simulate the model using the initial states returned by data2state.

    sim(M, z2, 'init', x0);

Continue from End of Previous Simulation

Continue the simulation of a nonlinear ARX model from the end of a previous simulation run.

Estimate a nonlinear ARX model from data.

load iddata2
M = nlarx(z2, [2 2 1], 'tree');

Simulate the model using the first half of the input data z2. Start the simulation from zero initial states.

u1 = z2(1:200,[]);
ys1 = sim(M, u1, 'init', 'z');

Start another simulation using the second half of the input data z2. Use the same states of the model from when the first simulation ended.

u2 = z2(201:end, []);

To set the initial states for second simulation correctly, package input u1 and output ys1 from the first simulation into one iddata object. Pass this data as initial conditions for the next simulation.

firstSimData = [ys1,u1];
ys2 = sim(M, u2, 'init', firstSimData);

Verify the two simulations by comparing to a complete simulation using all the input data z2.

uTotal = z2(:,[]); % extract the whole input data
ysTotal = sim(M, uTotal, 'init', 'z');

Compare the three responses ys1 , ys2 and ysTotal by plotting them. ys1 should be equal to first half of ysTotal. ys2 should be equal to the second half of ysTotal.

plot(ys1,'b', ys2, 'g', ysTotal, 'k*')

The plot shows that the three responses ys1, ys2 and ysTotal overlap.

Match Model Response to Output Data

Estimate initial states of model M such that the response best matches the output in data set z2.

  1. Load the sample data and create data object z2.

    load iddata2;
    z2 = z2(1:50);
    
  2. Estimate idnlarx model from data.

    M = nlarx(z2,[4 3 2],'wave'); 
  3. Estimate initial states of M to best fit z2.y in the simulated response.

    x0 = findstates(M,z2,[],'sim'); 
    
  4. Simulate the model.

    ysim = sim(M, z2.u, 'init', x0)
    
  5. Compare ysim with the output signal in z2:

    time = z2.SamplingInstants;
    plot(time, ysim, time, z2.y,'.') 

Simulate Near Steady State with Known Input and Unknown Output

Start simulation of a model near steady state, where the input is known to be 1, but the output is unknown.

  • Load sample data and create data object z2.

    load iddata2
    z2 = z2(1:50);
  • Estimate idnlarx model from data.

    M = nlarx(z2, [4 3 2], 'wave');
    
  • Determine equilibrium state values for input 1 and the unknown target output.

    x0 = findop(M, 'steady', 1, NaN);
  • Simulate the model using initial states x0.

    sim(M, z2.u, 'init', x0)
    

See Also

| | |

Was this topic helpful?